What are line wrenches

An open-ended wrench may grip the nut, but often the line joint is located in tight places where the wrench does not swing far enough to allow a second placement with the nut in its new position. … The increased contact area helps prevent the soft metal of the nuts and fittings from being rounded off by the wrench.

Are line wrenches necessary?

Why are line wrenches open ended *?

Open-ended Wrenches: The main advantage of this type of wrench is that they are usually shorter than combination wrenches, which makes it easier to work in confined spaces. … Especially for soft materials like mild steel, an open ended wrench is likely to slip and round off the corners of the fastener.

What are the other names for a line wrench?

American nameBritish/Commonwealth nameGroupflare-nut wrench tube wrench line wrenchflare spanner flare nut spanner brake spanner crow’s-foot spannercommonratcheting box wrenchratcheting ring spannercommonflex-head socket wrench Saltus wrenchswivel head spannercommon

How do you use line wrenches?

To use a line wrench, just slip the open part of the wrench over the line, then slide it onto the hex part of the fitting. What Order Do I Tighten My Lug Nuts?

What is a crows foot tool?

Crowfoot wrenches are open-end sockets that come in handy when reaching around obstacles. They work where common 6pt and 12pt sockets and wrenches simply cannot fit. … The crowfoot wrench above is shown attached to a ratchet with a short extension for extra reach.

What is flare nut?

During assembly, a flare nut is used to secure the flared tubing’s tapered end to the also tapered fitting, producing a pressure-resistant, leak-tight seal. Flared connections offer a high degree of long-term reliability and for this reason are often used in mission-critical and inaccessible locations.

When should you use a flare nut wrench?

Obviously, flare-nut wrenches are best for tightening or loosening hexagonal nuts and fittings. This makes them versatile and useful, especially for working on cars or plumbing. The most popular industry to use flare-nut wrenches is the automobile industry.

What size are brake line fittings?

The two most common brake lines found are 3/16″/4.75mm and 1/4″. The smaller size is 3/16″/4.75mm brake line, CNF-3; and the larger size is 1/4″, CNF-4. 3/16″ is found on virtually all cars and trucks made in the world.

What does a flare nut wrench look like?

Flare nut wrenches are a type of open-ended wrench that’s intended for use with hexagonal nuts and fittings, which are sometimes referred to as flare fittings. Visually, they resemble box or ratchet wrenches but with an open head instead of a closed loop.

Article first time published on

Where should flare nut spanner should not to be used?

Unlike 12-point ring spanners, 12-point flare nut spanners are not suitable for use on square fastener heads.

What are the three styles of wrenches?

Both of these have the same purpose. Moreover, there are three types of wrenches, which are socket, key, and spanner. A socket wrench can be a standard part of your toolbox. It can be inserted into a socket either vertically or horizontally to turn the bolt.

What is spud wrench?

Spud wrenches have a tapered spike at the handle end that’s used to align bolt holes when installing automotive components, beams, girders, or pipe fittings. The opposite end comes with a wrench to rotate fasteners for installation or removal.

What are the different types of socket wrenches?

#1) Ratcheting. Ratching is the most common type of socket wrench. …
#2) Flex Head. There are flex-head socket wrenches that have a swiveling head. …
#3) T-Handle. One of the most basic types of socket wrenches is the T-handle. …
#4) Nut Driver. Another type of socket wrench is nut driver. …
#5) Gearless.

How many different kinds of wrenches are there?

On top of these standard tools, there are over 40 different wrenches on the market. In this article, we’ll review 40 different wrenches and their uses. From adjustable wrenches to fire hydrant wrenches, this article discusses all the varieties of wrenches available.

What tool is used to turn sockets?

The most prevalent form is the ratcheting socket wrench, often informally called a ratchet. A ratchet incorporates a reversible ratcheting mechanism which allows the user to pivot the tool back and forth to turn its socket instead of removing and repositioning a wrench to do so.

What is the advantage of an offset wrench?

In short, having the offset angle allows you to use the wrench in confined spaces as well as on flat surfaces. It allows for an increase in movement which creates a larger turning arc when space is a restriction. Even if you have all the space in the world, offsetting the wrench decreases the overall swing needed.

What do torque wrenches do?

A torque wrench is a tool used to control and apply a specific torque to a fastener such as a bolt or a nut. … Not only for the wheels, but also for any other bolted parts such as the cylinder head, a torque controlled solution must be used to tighten at the required torque.

What is a Flareless fitting?

Also commonly known as compression fittings, flareless fittings are used in medium to high-pressure applications. They have comprised of a nut, single or double ferrule and the fitting body. The nut and ferrule(s) slide over a tube with an OD that matches the ID of the receiving fitting.

What is the difference between an open end and a box end wrench?

They come either separately or in a combination form, with one end being an open wrench, while the other is boxed. The box end has a tendency to slip off, while the open end allows more versatility since it needs only to contact two sides of the nut or bolt.

What is a combination wrench?

Definition of combination wrench : a wrench with one open end and one socket end.

Why is it called a Crowfoot wrench?

Called a “crowfoot” wrench because of its shape, this wrench was used in steam train repair work and to reach and to hold nuts and boltheads in difficult-to-reach places.

What does a box-end wrench look like?

Box-end wrenches have ends that enclose the nut and have 6, 8, 12, or 16 points inside the head. … Early box and socket wrenches fit only a particular nut or screw with flat surfaces on the head. The open-end wrench may have rectangular slots on one or both ends.

Do you use Teflon tape on brake line fittings?

The short answer is no–they do not. The more important point is that you should never attempt to use Teflon tape when attaching brake lines. Not only do brake lines not need Teflon tape, it would be dangerous to use Teflon tape on your brake lines in the first place.

How do you measure brake line threads?

First, use calipers to measure the thread diameter. The male threads will be slightly smaller than the nominal size, and the female threads will be slightly larger than their nominal size. Next, measure the pitch. For imperial sizes, count the number of crests within a ½” section and multiply it by two to get TPI.

Are brake line fittings NPT?

National Pipe Thread is a tapered machine thread for threaded pipes and fittings . NPT threads can be referred to as “Male pipe thread” or “Female pipe thread”. … We use these in the Street Rod and Racing industries for fluid fittings such as oil lines, brake lines, and coolant lines.

Why should you be careful when loosening or tightening fasteners with an air wrench?

When loosening a lug nut you’ll notice the socket attached to the impact wrench moving slowly as the lug nut is loosened and then quickly when it’s loose. Be cautious when tightening lug nuts using an impact as it’s easy to over torque them—which can stretch or even strip the threads.

What is the most common use of flare nuts and lines in automotive?

The 45-degree inverted flare is the most common style of flare used in automotive hard lines like brake, fuel, and transmission fluid transfer.

Why use a 6 point wrench when a 12 point is available?

If your fastener is 12-point, which is somewhat uncommon, then you must use a 12-point tool. For 6-point fasteners, a 6-point tool is your best choice. Matching up the points between the tool and fastener means that you will maximize the surface area of steel in contact, making the tool less likely to slip or fail.

When would you use an adjustable spanner?

What is the purpose of an adjustable wrench? An adjustable wrench, also known as an adjustable spanner or crescent, is used to turn or loosen a nut or bolt. This wrench has jagged jaws, one of which you can adjust to get the grip you need.

When using a ratchet the handle will?

A ratchet is a handle that snaps into one end of a socket by means of a square-drive connector. The other end of the socket fits over a fastener. A mechanism in the ratchet allows the handle to engage and tighten the fastener when you swing it in a clockwise direction and turn freely when you swing it counterclockwise.